# Firmware Switching

## Switching fromStandard Edition Firmware to Xiaozhi Edition Firmware

After flashing the Standard Edition firmware, the device will boot into the Standard Edition by default. To switch to the Xiaozhi Edition, you can perform a one-touch switch in mode.

**Operation Steps**

| ![](img/A1.gif) | ![](img/A2.gif) |
| --- | --- |
| 1. Power on the device running the Standard Edition firmware. | 2. Use the left and right buttons to navigate and switch the current mode to. |
| ![](img/A3.png) | ![](img/A4.gif) |
| 3. After entering , select the interface displaying “AI”. | 4. The display will show a switching progress indicator. Once the process is complete, the device will switch to Xiaozhi AI mode and enter network configuration mode.<br/>For network configuration steps, please refer to the [Xiaozhi AI User Guide](https://icreaterobot-icrobot-docs.readthedocs.io/en/latest/docs/ICRobot/04OperationManual/02XiaoZhiAIConfigurationGuide.html) |



## Switching from Xiaozhi Edition Firmware to Standard Edition Firmware

When the device is running in Xiaozhi mode, you can switch back to the Standard Edition by pressing the ▶ button / B button three times consecutively while the device is not in standby mode.

**Operation Steps**

| ![](img/A5.gif) |![](img/A6.png)|
| --- | --- |
| 1. Power on the device running the Xiaozhi Edition firmware. | 2. Press the ▶ button / B button three times consecutively. |
| ![](img/A7.gif) ||
| 3. The display will show the switching progress.<br/> Once the device prompts “Please scan the QR code to connect to the network,” br/<>the switch is complete. For usage instructions, <br/>please refer to the [Robot Programming User Guide](https://icreaterobot-icrobot-docs.readthedocs.io/en/latest/docs/ICRobot/02QuickStart/02ProgrammingtheRobotviaSoftware.html) | |