ICreateCodeSoftware
- Software Installation – ICreateCode
- Interface Guide
- ICRobot Block Guide
- Motion
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power ( ) Seconds
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power for ( ) cm
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power for () degrees until done
- Robot’s left wheel rotates at ( ) % power, right wheel rotates at ( ) % power
- Robot’s motor (left wheel / right wheel) with ( )% power for ( ) (Seconds / cm)
- Robot’s motor (left wheel / right wheel) rotates at ( ) % power indefinitely
- Stop Movement
- Display (Matrix LED)
- Set display brightness to (1–10)
- (Static / Right to Left / Left to Right / Top to Bottom / Bottom to Top) Display () for () seconds
- (Static / Right to Left / Left to Right / Top to Bottom / Bottom to Top) Display ( )
- Display Text ()
- Light up x() y()
- Only light up x() y()
- Turn off x() y()
- Toggle x() y()
- Set tail light color（）
- Set tail light color to R() G() B()
- Turn off display
- Audio
- Actuators
- Sensors
- Button (A/B) pressed
- Sound（）（）
- Current sound level
- Current battery level
- （）current speed
- Privacy switch status
- （）movement distance
- Set line-following sensor to () mode
- Run Line Following Sensor Binary Learning
- Run Line Following Sensor Learning () Colour
- Value detected by the roving sensor probe ( )
- Line Following probe () detects ()
- Line Following probe () value () ()
- Turn off Line Following sensor
- Start auto line following at () speed
- Start auto line following at () speed until state is ()
- Stop auto line following
- Motion
- User’s Guide
- ExtensionBlocksGuide