ICRobot
- ProductOverview
- QuickStart
- ComponentsandHardwareDescription
- Grove Interface
- Launcher
- Robotic Gripper
- LED Matrix Display
- Camera
- Movement Module
- Five-way Color & Gray Sensor
- Speaker
- Function Button
- Programmable Tail Light Module
- Microphone
- Component Usage Examples
- OperationManual
- ICreateCodeSoftware
- Software Installation – ICreateCode
- Interface Guide
- ICRobot Block Guide
- Motion
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power ( ) Seconds
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power for ( ) cm
- Robot (moves forward、moves backward、turns left、turns light) at ( ) % power for () degrees until done
- Robot’s left wheel rotates at ( ) % power, right wheel rotates at ( ) % power
- Robot’s motor (left wheel / right wheel) with ( )% power for ( ) (Seconds / cm)
- Robot’s motor (left wheel / right wheel) rotates at ( ) % power indefinitely
- Stop Movement
- Display (Matrix LED)
- Set display brightness to (1–10)
- (Static / Right to Left / Left to Right / Top to Bottom / Bottom to Top) Display () for () seconds
- (Static / Right to Left / Left to Right / Top to Bottom / Bottom to Top) Display ( )
- Display Text ()
- Light up x() y()
- Only light up x() y()
- Turn off x() y()
- Toggle x() y()
- Set tail light color()
- Set tail light color to R() G() B()
- Turn off display
- Audio
- Actuators
- Sensors
- Button (A/B) pressed
- Sound()()
- Current sound level
- Current battery level
- ()current speed
- Privacy switch status
- ()movement distance
- Set line-following sensor to () mode
- Run Line Following Sensor Binary Learning
- Run Line Following Sensor Learning () Colour
- Value detected by the roving sensor probe ( )
- Line Following probe () detects ()
- Line Following probe () value () ()
- Turn off Line Following sensor
- Start auto line following at () speed
- Start auto line following at () speed until state is ()
- Stop auto line following
- Motion
- User’s Guide
- ExtensionBlocksGuide
- Curriculum & Case Studies
- FirmwareManagement
- TroubleshootingandSafetyNotes
- Usage Precautions
- Hardware-Related Issues
- The robot cannot control modules (e.g., launcher or gripper) after connection
- Module (gripper or launcher) behaves abnormally after prolonged use
- Robot malfunctions (e.g., freezing or no response) after long periods of operation
- Camera or microphone not functioning
- Poor performance during line-following with the 5-way color & grayscale sensor
- Inaccurate color recognition with the 5-way color & grayscale sensor
- The camera or microphone is not functioning properly.
- Software-Related Issues
- Robot issues persist after firmware upgrade via “ICreateCode.exe”
- After the computer goes black screen and restarts, the communication between the robot and the computer fails, such as: the program cannot control the robot, the computer cannot obtain the return data, etc.
- STA mode network connection failure
- Device name not displayed in AP mode
- COM port not found during firmware switch